This new website is under development. You are welcome to send us your feedback regarding possible errors or troubles!
Login
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

Air heating unit VENTS AOE

  • Description
  • Modifications
  • Downloads
  • Legend
Description
Description

APPLICATION

  • Designed for air heating in the room with electric heater and air uniform distribution due to an integrated fan and louvre shutters.
  • The air heating units enable quick air heating of large premises or provide local heating of a work zone, for example, in big airplane shed or production facilities.
  • The air heating units are designed for installation in manufacturing workshops, garages, car showrooms, stock houses, trade facilities, super- and hypermarkets, shops, sport halls, conference halls, poultry and cattle farms, greenhouses and other similar premises.
  • The unit design enables quick and easy mounting and its operation reduces total investment costs for heating system.

DESIGN

  • The AOE unit consists of an axial fan and an electric heater enclosed into a steel polymer coated casing.
  • The electric heater is equipped with two overheating thermostats:
    • the main overheating protection with automatic reset is activated at +50 °C. After the heater cooling the thermostat closes the heater control circuit.
    • the alarm overheating protection with manual reset is activated at +90 °C. In case of alarm thermostat activation power supply to the heater is posible after manual alarm reset only.

FAN MOTOR

  • AC motors with external rotor and built-in thermal overheating protection with automatic reset.

ADVANTAGES OF AIR HEATING:

  • quick temperature increase in the room up to set point;
  • low inertance of the system allows to provide alternating heating mode or heating in some zones;
  • high heating efficiency;
  • capital investments for air heating system is much less as compared to the similar water heating system.

CONTROL AND REGULATION

  • For safe and correct operation the air heating unit must be controlled with integral control and protection automatic control system to provide the following functions:
    • automatic power and heating temperature adjustment;
    • power supply cut-off to the heater in case of the fan shutdown, low air flow or if integrated motor overheating thermostats are activated;
    • air supply to the electric heating elements for heating removal after shutoff of the heating unit;
    • power supply to the heater via an integrated automatic circuit breaker with tripping current depending on the heater power.
  • The heating unit operation modes are controlled from UET-15D or UET-30D (available upon separate order) control unit.

  • Air flow temperature is controlled by the heater on/off switch time (full heating power) in compliance with a set heating point.
  • The control unit controls the fan speed and cuts off power supply to the heater in case of the fan shutdown or very low air flow.
  • The control unit is designed for joint operation with digital TST-1-300 thermostats with sensor display (TSTD-1-300 model is equipped with a remote controller) or RTS-1-400 with LCD display (RTSD-1-400 is equipped with a remote controller). The thermostats are available on separate order.
  • The thermostat is designed for indoor installation in the room heated by the air heating unit to determine its operation mode.
  • The thermostat installation place must not be influenced by windows, doors and heating radiators.
  • One thermostat is capable to control several connected air heating units in one room (max. 10 AOE units per each thermostat).

ACCESSORY SELECTION TABLE:

 
Air heating unit model Control unit Digital thermostat Mounting accessories
    with sensor display with LCD display Mounting angles Mounting brackets Multi-angle bracket
 
АОЕ 9 UET-15D

TST-1-300

TSTD-1-300

RTS-1-400

RTSD-1-400

MKP-AOW MK-AOW 25 MKU-AOW 25
АОЕ 12
АОЕ 15
АОЕ 18 UET-30D MK-AOW 45 MKU-AOW 45
АОЕ 24
АОЕ 30

WARM AIR DISTRIBUTION

MOUNTING WARNING!
  • The air heating unit is suitable for vertical installation on the walls (beams) or horizontal installation on the ceiling (beams).
While mounting AOE units provide free air supply to the fan suction vent by keeping the minimum distance from the units to the wall or ceiling 300 mm.
Modifications
Modification name
AOE 9
АОЕ 24
АОЕ 12
АОЕ 30
АОЕ 15
АОЕ 18
+
+
+
+
+
+
Downloads
Downloads
Name
Brochure "VENTS AOE" (pdf 640.88Kb)
Download high quality image "VENTS AOE (front view)" (psd 2.6Mb)
Download image "VENTS AOE (front view)" for your website (png 584.55Kb)
Leaflet "Air heating (cooling) units" (pdf 2.43Mb)
User's manual "Control unit for VENTS AOE" (pdf 2.37Mb)
User's manual "VENTS AOE" (pdf 1.13Mb)
Download high quality image "VENTS AOE (back view)" (psd 2.72Mb)
Download image "VENTS AOE (back view)" for your website (png 647.98Kb)
Legend
Legend
Series   Rated power [kW]
VENTS AOE   9; 12; 15; 18; 24; 30
Share your opinion
I found this page useful to select the required products easy and quick
No difficulties with the site use. Everything is logical ad clear
The site produced a nice impression

Questionnaire
Please evaluate our updated site user friendliness