MICRA 100

Print version Save in PDF format

MICRA 100 is a single-room energy-efficient air handling unit intended for decentralised ventilation of residential and commercial spaces as well as apartments and houses. This unit is ideally suited for creating simple yet highly efficient ventilation systems in newly erected and renovated spaces without requiring duct installation.

Model features

Series of products

VENTS Micra 100

VENTS Micra 100 E

VENTS Micra 100 E1

VENTS Micra 100 ERV

VENTS Micra 100 E ERV

VENTS Micra 100 E1 ERV

VENTS Micra 100 E2

VENTS Micra 100 E2 ERV

VENTS Micra 100VENTS Micra 100 EVENTS Micra 100 E1

VENTS Micra 100 ERVVENTS Micra 100 E ERVVENTS Micra 100 E1 ERV

VENTS Micra 100 E2VENTS Micra 100 E2 ERV

3D model

Gallery

Description
Modifications
Capacity diagram
Downloads
Accessories
Ventilation system arrangement

Description

FEATURES

Efficient solution for supply and exhaust ventilation of enclosed spaces.
Models with an electric preheater or reheater are available for cold climate conditions.
Modification with an enthalpy heat exchanger available for humid and hot climate conditions.
EC fans with low energy consumption.
Silent operation.

Supply air purification ensured by two integrated G4 and F8 filters.
Optionally – F8 Carbon, H13.
Upgradeable with an extract air duct to provide air extraction from the bathroom.
Easy installation.
Compact size.
Modern design.

OPERATING LOGIC

CONTROL AND AUTOMATION

The unit is equipped with a control panel. A remote control is included in the delivery set.

Switching the unit on/off
Speed selection
Reheater temperature setpoint increase (for models equipped with a reheater)
Switching the reheater on/off (for models equipped with a reheater)
Reheater temperature setpoint decrease (for models equipped with a reheater)
Timer on/off
Scheduled operation on/off

Available functions	MICRA 100 MICRA 100 E	MICRA 100 E1 MICRA 100 E2
Speed switching	+	+
Filter replacement indication	+	+
Alarm indication	+	+
Speed setting	+	+
Timer	+	+
Weekly schedule	+	+
Reheating on/off	-	+
Supply air temperature setting	-	+

CASING

FANS

Polymer coated metal casing decorated with an acrylic front panel.
Due to modern design, the unit matches well with any interior.
Heat and sound insulation is ensured by a layer of 10 mm cellular synthetic rubber.
The front panel provides convenient access for filter maintenance and has a lock for extra security.
The unit has two Ø 100 mm spigots for fresh air intake and stale air extraction outside.
The third Ø 100 mm spigot (included in the delivery set) can be additionally fitted to the unit to connect the extract air duct from the bathroom.

The units feature efficient electronically commutated (ЕС) motors with an external rotor and impellers with forward curved blades.
In addition to that, the efficiency of electronically commutated motors reaches very impressive levels of up to 90 %.

FILTERS

Intake air cleaning is provided by G4 and F8 panel filters.
To meet more stringent air purity requirements, an F8 filter can be replaced with an H13 filter (purchased separately).
Extract air is cleaned by a panel G4 filter.

HEAT EXCHANGER

The MICRA 100 units are equipped with a counter-flow heat exchanger with a polystyrene core.
In the cold season the extract air heat is transferred to the intake air stream which reduces heat losses through ventilation.
However, this can lead to formation of condensate that is collected in a special drain pan and is drained off outside through the exhaust air duct.
In the warm season the ambient air heat is transferred to the extract air.
This allows for a considerable reduction of the supply air temperature which, in turn, reduces the air conditioning load.

The MICRA 100 ERV unit is equipped with a counter-flow enthalpy heat exchanger.
In the cold season the extract air heat and moisture are transferred to the supply air stream through the enthalpy heat exchanger reducing the heat losses through ventilation.
The ambient air heat and moisture are transferred to the extract air through the enthalpy heat exchanger in the warm season.
This allows for a considerable reduction of the supply air temperature and humidity which, in turn, reduces the air conditioning load.

REHEATING

PREHEATING

The MICRA 100 E1 and MICRA 100 E2 units are equipped with an electric reheater to raise the supply air temperature when necessary.

The MICRA E and MICRA 100 E2 units are equipped with an electric preheater which protects the heat exchanger from freezing.

FREEZE PROTECTION

NE MICRA 100 HEATER FOR CONDENSATE FREEZE PROTECTION (OPTIONAL)

The MICRA 100 unit features an exhaust air temperature sensor downstream of the heat exchanger which disables the supply fan to let the warm extract air raise the heat exchanger temperature.
Then the supply fan is turned on and the unit reverts to normal operation.
Freeze protection for MICRA 100 and MICRA 100 E2 units is implemented with a preheater.

Operation in a cold climate may result in condensate freezing in the exhaust air duct and the external hood.
Therefore, it is recommended to install the NE MICRA 100 heater (purchased separately) to prevent icing.

Modifications

Modification name

Micra 100

Micra 100 E2 ERV

Micra 100 E ERV

Micra 100 E

Micra 100 E1 ERV

Micra 100 E1

Micra 100 E2

Micra 100 ERV

Capacity diagram

Selection method:
Air flow:
Pressure:

Operating point

Air flow: --
Pressure: ---

Downloads

Accessories

Name	Picture	Description
MK Micra 100 white		Mounting kit: Two plastic Ø 100 mm air ducts 500 mm long; Outdoor box (white); Cardboard template
MK Micra 100 chrome		Mounting kit: Two plastic Ø 100 mm air ducts 500 mm long; Brushed stainless steel outdoor box; Cardboard template
NB Micra 100 white		Outdoor box (white)
NB Micra 100 chrome		Brushed stainless steel outdoor box
NE Micra 100		Heater to prevent condensate freezing in the drain pipe and the outdoor box
SF 193x158x18 G4		G4 filter
SF 193x158x47 F8		F8 filter
SF 193x158x47 F8 C		F8 carbon filter
SF 193x158x47 H13		H13 HEPA filter
HR-S		HR-S humidity sensor
CO2-1		СО₂ sensor with air quality indication and On/Off button
CO2-2		CO₂ sensor
VL R6 366/157		Summer block

Ventilation system arrangement

Each space requiring proper ventilation should be equipped with a single or several MICRA 100 units. A single unit is capable of ensuring efficient ventilation in spaces with floor area up to 100 m².	MICRA 100 units can be upgraded with a bathroom extract air duct. For this, the units can be additionally equipped with an optional Ø 100 mm spigot (included in the delivery set).
MICRA 100 APPLICATION IN AN OFFICE SPACE


MICRA 100 APPLICATION IN A COMPACT RESIDENTIAL SPACE

Accessories

VENTS CO2 sensor More

Electro-mechanical humidistats VENTS HR-S More