Privacy Policy (GDPR)
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS 100 Silenta-SV

  • Description
  • Characteristics
  • Downloads
  • Options
  • Dimensions
  • Continuous or periodic exhaust ventilation of bathroom, showers, kitchens and other utility spaces.
  • Ventilation of premises with high noise level limitations.
  • Ventilation shaft mounting or duct connection.
  • Compatible with 100, 125 and 150 mm air ducts.
  • Modern design and aesthetic look.
  • The casing and the impeller are made of high-quality durable ABS plastic, UV resistant.
  • The intellectual impeller design makes the fan efficiency high and the service life long.
  • The fan and motor are specially designed for silent operation.
  • Insect screen.
  • Protection rating IP 34.
  • Reliable motor with the minimum power consumption 7 W (for 100 diameter).
  • Designed for continuous operation and requires no maintenance.
  • Equipped with overheating protection.


  • The fan is controlled by a room light switch. It is not included in the delivery package.
  • The fan is controlled by the built-in pull cord switch V. Not applied in case of ceiling mounting.
  • Speed control is possible through a thyristor speed controller (see Electrical Accessories). Several fans may connected to the same controller. Speed controllers can not be connected to the fans with TTHTPVTVTH modification.


  • By the electronic control unit BU-1-60 (see Electrical Accessories). The control unit is supplied separately.
  • By the timer T (the built-in run-out timer enables the fan operation within 2 to 30 minutes after the fan switching off).
  • By the humidity sensor and timer TH (if the humidity level in the room exceeds the sensor threshold adjustable value within 60-90% the fan switches automatically on and operates until the humidity level drops to the standard level, after that the fan continues operating within the time period according to the timer setting, then shuts down).
  • The fan is mounted directly into the ventilation shaft.
  • Flexible duct application is recommended in case of remote location of the ventilation shaft. The air duct is connected to the fan exhaust flange through a clamp.
  • Fixed to the wall by self-tapping screws.
  • Suitable for ceiling mounting.
Parameter Value Measurement unit
Voltage 220-240 V
Frequency 50/60 Hz
Power consumption 7 W
Air capacity 78 m³/h
Current 0.035 A
Sound pressure level at 3 m 26 dBА
Weight 0.52 kg
Spigot size 100 mm
Engine Type 220-240V / 50-60Hz -
Duct diameter 100 mm
Design axial -
IP Code IP 34 -
Type exhaust -
Mounting wall mounting , ceiling mounting -
Files archieve
Modification name Pull-cord switch
VENTS 100 Silenta-SV
VENTS 100 Silenta-S
Parameter Value Measurement unit
Ø D 100 mm
B 150 mm
H 120 mm
L 108 mm
L1 12 mm
Designation key
Designation key
Silenta-S K Fan is equipped with a backdraft damper for back flow preventing.
Silenta-S L The motor is equipped with ball bearings for long service life (appr. 40  thousand hours) and fan mounting at any angle. The bearings are maintenance-free and contain enough grease for the entire operating period.
Silenta-ST Equipped with a regulated timer with the operating time from 2 to 30 minutes.
Silenta-STH Equipped with a  timer with the operating time from 2 to 30 minutes and a humidity sensor with the threshold value from 60 to 90%.
Silents-SV Equipped with a pull cord switch.
Silenta-SVТ Equipped with a pull cord switch and a regulated timer with the operating time adjustable from 2 to 30 minutes.
Silenta-SVТН Equipped with a pull cord switch, regulated timer with the operating time adjustable from 2 to 30 minutes and a humidity sensor with the operating threshold range from 60% to 90%.

Share your opinion

Where have you learned about us?