Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS 100 Z

  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Options
  • Dimensions
  • Wiring plan
Description
Description
APPLICATIONS
  • Continuous or periodic air extraction of bathroom, showers, kitchens and other utility spaces.
  • Ventilation shaft mounting or duct connection.
  • Delivery of low and medium intensity air flow to small distances over a low-resistance ventilation system.
  • Compatible with 100, 125 and 150 mm ducting.
DESIGN              
  • Combine modern design and esthetically pleasing appearance.
  • The body and impeller are made of high-quality durable ABS plastic, UV resistant.
  • The impeller design contributes to an improved fan performance and prolonged motor service life.
  • Protection Class IP 24.
FRONT PANEL MODIFICATIONS
   
  Z 1 Z 2 Z 3 Z 4 Z 5 Z 6  
MOTOR              
  • Reliable and energy-efficient electric motor.
  • Intended for continuous operation and maintenance-free.
  • Equipped with integral overheating protection.

Manual:

  • The fan is controlled by means of the room light switch. The switch is not included in the delivery package.
  • Speed control is possible through a thyristor speed controller (see Electrical Accessories). Several fans may connected to the same controller. Speed controllers can not be connected to the fans with TTHTPVTVTH modification.

Automatic:

  • By means of electronic control unit BU-1-60 (see Electrical Accessories). The control unit is supplied separately.
MOUNTING  
  • The fan is mounted directly into the ventilation shaft opening.
  • If the ventilation shaft remoteness prevents direct installation flexible ducts may be used. The ducts are coupled with the fan outlet flange by means of a clamp.
  • Fixed to the wall on self-tapping screws.
  • For 12 V low-voltage motor fan connection to 220 V / 50 Hz power mains use the step-down transformer TRF 220/12-25 that is available upon separate order.
MOUNTING EXAMPLE  
 
Characteristics
Characteristics
Parameter Value Measurement unit
Duct diameter 100 mm
Design axial -
Voltage 220-240 V
Frequency 50/60 Hz
Power consumption 14 W
Air capacity 105 m³/h
Current 0.085 A
RPM 2300 min-1
Sound pressure level at 3 m 37 dBА
Weight 0.41 kg
Spigot size 100 mm
Engine Type 220-240V / 50-60Hz -
Protection rating IP 24 -
Type exhaust -
Mounting wall mounting , ceiling mounting -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air flow:
  • Pressure:
Operating point
  • Air flow: --
  • Pressure: ---
Files archieve
Downloads
Name
Brochure "VENTS Z" (pdf 2.81Mb)
Download high quality image "VENTS Z" (psd 2.31Mb)
User's manual "VENTS Z,Vitro,Z star,Vitro star" (pdf 3.72Mb)
Download image "VENTS Z" for your website (png 493.12Kb)
Certificate GS "Z" (pdf 233.64Kb)
Certificate LVD "Z" (pdf 249.01Kb)
Certificate LVD "Z,Vitro (12V)" (pdf 204.89Kb)
Declaration of сonformity RoHS "Domestic fans VENTS" (pdf 1.34Mb)
Modifications
Modifications
Modification name
VENTS 100 Z
+
Dimensions
Characteristics
VENTS 100 Z
Parameter Value Measurement unit
∅D 100 mm
B 181 mm
H 120 mm
L 143 mm
L1 56 mm
Wiring plan
Wiring plan
Wiring diagram for the fans equipped with a built-in switch Wiring diagram for the fans without built-in switch
Wiring diagram for the fans equipped with a timer / timer, humidity sensor and a built-in switch Wiring diagram for the fans equipped with a timer / timer with a humidity sensor without built-in switch
Wiring diagram for the fans with a light lamp. Separate activation of the fan and the built-in lamp. Wiring diagram for the fans with a light lamp. Parallel activation of the fan and the built-in lamp.
Wiring diagram for the fans with an light lamp and grounding. Separate activation of the fan and the built-in lamp. Wiring diagram for the fans with a light lamp and grounding. Parallel switching of the fan and the built-in lamp.
Wiring diagram for the fans with grounding  
 

* - only for fans designed for 12 V rated voltage (specified on the fan casing and packing).
S, S1, S2 - external switches.

Operating logic of the fans with optional equipment
  • The fan equipped with a timer is activated by the control voltage supplied to LT input. After the control voltage is disconnected the fan continues operating within the time period within 2 to 30 minutes according to the timer settings. The turn-off delay time is adjusted by turning the respective potentiometer T control knob clockwise to increase and counter-clockwise to reduce it.
  • The fan equipped with a timer and humidity sensor is activated by the control voltage supplied to LT input or in case of exceeding the preset humidity threshold value adjustable from ~60% to ~90%. After the control voltage is disconnected or as the humidity level H drops below the set threshold the fan continues operating within the time period within 2 to 30 minutes according to the timer settings.  The turn-off delay time and the threshold humidity level are adjusted by turning the control knob of the respective potentiometer T for timer and H for humidity sensor clockwise to increase and counter-clockwise to reduce the set value. To set the maximum humidity level (90%) set the potentiometer control knob for H max position.
  • The fan equipped with a timer and motion sensor is activated in case of the moving detection at the distance from 1 m to 4 m with 100° detection angle. After motion is off the fan continues operating within the time period within 2 to 30 minutes according to the timer settings. The turn-off delay time is adjusted by turning the respective potentiometer T control knob clockwise to increase and counter-clockwise to reduce it.
  • Wiring diagram for connection of the light lamp to the fan timer operated by the common switch is shown on diagram 4. Upon the light lamp disconnection the fan continues operating according to the timer setting within the set time period.
Legend
Legend
Picture symbol   Designation   Modification description
  Z L   The motor is equipped with ball bearings for long service life (appr. 40 thousand hours) and fan mounting at any angle. The bearings are maintenance-free and contain enough grease for the entire operating period.
  Z turbo   High-powered motor.
  Z 12   Modification with low-voltage motor. 12 V AC power supply.
Share your opinion
I found this page useful to select the required products easy and quick
No difficulties with the site use. Everything is logical ad clear
The site produced a nice impression

Questionnaire
Is our site helpful for your business development?